home *** CD-ROM | disk | FTP | other *** search
/ The 640 MEG Shareware Studio 2 / The 640 Meg Shareware Studio CD-ROM Volume II (Data Express)(1993).ISO / door / qmailcfg.zip / QMAILCFG.DOC < prev   
Text File  |  1992-04-18  |  3KB  |  60 lines
  1. Here is how you can ADD and DROP conferences from your Qmail Door 4.00
  2. setup directly from inside your offline mail reader.  All you need
  3. to do is to enter a message to "QMAIL" with a subject of "CONFIG"
  4. (without quotes).  Then, enter any of the commands listed below inside
  5. the text of your message.  Remember to use one command per line.
  6.  
  7. Here is a list of commands accepted by The Qmail Door:
  8.  
  9.  
  10.            ADD <confnum>             Add a conference into the
  11.                                      Qmail Door 4.00 scanning list.
  12.                                      "YOURS" can also be added to
  13.                                      the command if the user wishes
  14.                                      to receive messages only
  15.                                      addressed them.
  16.                                      Example: ADD 1 YOURS
  17.  
  18.            DROP <confnum>            Drop a conference from the
  19.                                      Qmail Door 4.00 scanning list.
  20.  
  21.            RESET <confnum> <value>   Resets a conference to a
  22.                                      particular value.  The user
  23.                                      can use "HIGH-xxx" to set the
  24.                                      conference to the highest
  25.                                      message in the base.
  26.  
  27.            CITY <value>              Changes the "city" field in the
  28.                                      User's PCBoard entry.
  29.  
  30.            PASSWORD <value>          Changes the user's login
  31.                                      password.
  32.  
  33.            BPHONE <value>            Business/data phone number
  34.  
  35.            HPHONE <value>            Home/voice phone number
  36.  
  37.            PCBEXPERT <on|off>        Turns the PCBoard EXPERT
  38.                                      mode ON or OFF.
  39.  
  40.            PCBPROT <value>           PCBoard file transfer
  41.                                      protocol (A-Z).
  42.  
  43.            PAGELEN <value>           Page length inside PCBoard.
  44.  
  45.            PCBCOMMENT <value>        User maintained comment.
  46.  
  47.            AUTOSTART <value>         Qmail Door autostart command.
  48.  
  49.            PROTOCOL <value>          Qmail Door file transfer
  50.                                      protocol (A-Z).
  51.  
  52.            EXPERT <on|off>           Turns the Qmail Door EXPERT
  53.                                      mode ON or OFF.
  54.  
  55.            MAXSIZE <value>           Maximum size of the user's
  56.                                      .QWK packet (in bytes)
  57.  
  58.            MAXNUMBER <value>         Maximum number of messages
  59.                                      per conference.
  60.